Desic Drill Adapter with Chuck 0.4 to 3.4mm

Most normal drill and drill press chucks will only hold a minimum diameter of 1.5mm. That's a problem if you want to use a 1.0mm twist drill or other drills/accessories with very small shanks. This drill chuck adapter goes in the chuck of your drill, now you have a mini-chuck that will hold drills and bits with shank sizes from 3.4mm down to 0.4mm.

SPECIFICATIONS
Chuck capacity 0.4 - 3.4mm
Shank 6mm
Overall length 54mm

NOTES
1. Diamond twist drill not included, sold separately.
2. Use in rotary mode only do not use hammer action.
3. The chuck looks the same as a Dremel 3-jaw chuck but is not compatible with Dremel Rotary Tools.