Diamond coated holesaws and core drills often don't have a pilot drill so they will skip around on the surface making it difficult to get the hole in the right place.
This drilling guide has a suction cup that sticks to the glass or tile you're drilling, so it's easy to get the hole in the right place. It can guide holesaws from 2mm to 65mm in diameter.
The adjustment slots are helpful if grout lines are in the way of the suction cup or you need a hole in a tight corner.
SPECIFICATIONS
For holesaws 2mm to 65mm diameter
Guide clearance from surface 16mm
Sticks to glass, tiles, polished granite etc
Use with diamond coated holesaws and diamond core drills
Lever action suction cup 55mm diameter
Size 55W x 100L x 40H mm
DRILLING TIPS
1. Wet cutting is best, it keeps the holesaw cool making it last a lot longer and also eliminates dust. Use a spray bottle with water while drilling or make a well around the area with plasticine or Blu-tac. Wet cutting is quicker because it flushes out the slurry.
2. If you MUST dry cut then drill 5 seconds and rest 10 seconds to avoid overheating.
3. Never use hammer action it is less effective and the holesaw may be damaged.
4. Oil after use to prevent rusting.
NOTE
The price is for the drilling guide only. Does not include diamond coated holesaw. See our website for the range of Desic Diamond Coated holesaws (many sizes) and Desic Diamond Core Drill Holesaw With Pilot (many sizes).
No reviews found