Menu

Desic Diamond Sintered Holesaw Glass And Tiles 6mm

T31333
$2800
In stock
Shipping Information
Description

The lead time for this product is 7-10 days.

Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away.

The thin kerf (thickness of cut) makes them ideal for precision cuts. They are best used in a drill press to avoid wobble which may cause damage to the holesaw.

They are more expensive than diamond coated holesaws but last a lot longer so if drilling a lot of holes they work out to be better value.

SUITABLE FOR THE FOLLOWING
Glass, marble, jade, greenstone, gem stones, porcelain, ceramic wall and floor tiles, granite, stone and slate etc.

SPECIFICATIONS
Diameter 6mm
Shank 10mm
Kerf 0.9mm
Working length 28mm
Total length 50mm
Inside hole size approx 4.35mm dia.
Shank hole for use with water swivel

DRILLING TIPS
1. Wet cutting is best, it keeps the holesaw cool making it last a lot longer and also eliminates dust. Use a spray bottle with water while drilling or make a well around the area with plasticine or Blu-tac. Wet cutting is quicker because it flushes out the slurry.
2. If you MUST dry cut then drill 5 seconds and rest 10 seconds to avoid overheating.
3. Never use hammer action it is less effective and the holesaw may be damaged.
4. To get the hole in the right place drill a hole the same size in a piece of wood and clamp it to the work. Remove the template once the holesaw has started cutting. This is a very safe way to cut glass and tiles.
5. Oil after use to prevent rusting.

NOTES
If you want to drill steel reinforced concrete see our range of Desic Diamond Core Drill Holesaws.

Reviews

No reviews found

  • Recently Viewed
  • Featured Products
  • On Sale