Wishlist
0Cart
Menu

Accessories

Brand
Price
DREMEL SANDING FLAPWHEEL 9.5MM WIDE 80 GRIT 502
Dremel Sanding Flapwheel 9.5mm Wide 80 Grit 502
0.0
In stock
$2190
+ −
These are really good for rust removal and cleaning surfaces and deburring edges etc. Perfect for sanding flat or contoured surfaces on metal ,wood, rubber or plastic. SPECIFICATIONS Wheel diameter 28.6mm Wheel width 9.5mm Shank diameter 3.2mm Sandpaper grit 80 Maximum rpm 35,000
DREMEL SANDING GRINDING GUIDE ATTACHMENT 576
Save 82%
Dremel Sanding Grinding Guide Attachment 576
0.0
In stock
$290 $1590 -82%
+ −
The Dremel Sanding Grinding Guide improves precision and control on a variety of tasks by providing the  support and stability needed for an accurate job. The Guidepoints work surface features flat and angled  areas to enable sanding and grinding...
DREMEL SHIELD ROTARY ATTACHMENT A550
Dremel Shield Rotary Attachment A550
0.0
In stock
$5900
+ −
The Dremel Shield Attachment redirects debris and sparks during cutting, grinding, sanding and polishing. It provides easy access to the accessory, and does not interfere with the work piece. Can be used with left or right-hand grip positions. Attaches to the tool in place of the...
DREMEL SILICON CARBIDE GRINDING STONE 19.8MM 85422 2615085422
Dremel Silicon Carbide Grinding Stone 19.8mm 85422 2615085422
0.0
In stock
$1690
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL SILICON CARBIDE GRINDING STONE 3.2MM 83702 2615083702
Dremel Silicon Carbide Grinding Stone 3.2mm 83702 2615083702
0.0
In stock
$1590
+ −
Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Always remember to have a spare battery pack charged up so you don't have to quit working to recharge your battery and keep your cordless rotary tool charged up and ready to...
DREMEL SILICON CARBIDE GRINDING STONE 4.8MM 2 PACK 84922 261584922C
Save 70%
Dremel Silicon Carbide Grinding Stone 4.8mm 2 Pack 84922 261584922C
0.0
In stock
$590 $1990 -70%
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL SPANNER COLLET WRENCH 2615040132
Save 83%
Dremel Spanner Collet Wrench 2615040132
0.0
In stock
$190 $1090 -83%
+ −
FEATURES - Combination of wrench and screwdriver. Use for loosening and tightening the collet nut to change bits. - It has a built-in screwdriver that can be used on the 402 mandrel or sanding drum mandrel with screw.  - Hole provides an easy way to hang the wrench...
DREMEL STAINLESS STEEL BRUSH 12.7MM 2 PACK 531-02 26150531AA
Dremel Stainless Steel Brush 12.7mm 2 Pack 531-02 26150531AA
0.0
In stock
$1990
+ −
Stainless steel brushes do not cause after-rust when used on corrosive-resistant materials like pewter, aluminium and stainless steel. FEATURES Working diameter 13mm Shank diameter 3.2mm - Secure objects to a stable surface while working. - For best results, insert the...
DREMEL STAINLESS STEEL BRUSH 19.1MM 2 PACK 530 26150530AC
Save 40%
Dremel Stainless Steel Brush 19.1mm 2 Pack 530 26150530AC
0.0
In stock
$1490 $2490 -40%
+ −
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals. It is very effective on...
DREMEL STAINLESS STEEL BRUSH 3.2MM 2 PACK 532 26150532AA
Save 40%
Dremel Stainless Steel Brush 3.2mm 2 Pack 532 26150532AA
0.0
In stock
$1490 $2490 -40%
+ −
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.   FEATURES Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other...
DREMEL STRAIGHT ROUTER BIT 4.8MM (3/16") 652
Dremel Straight Router Bit 4.8mm (3/16") 652
0.0
In stock
$3200
+ −
For routing, inlaying and mortising in wood and other soft materials. Use freehand or with Dremel Router Attachment 335 or Shaper/Router Table 231.     SPECIFICATIONS Cutting diameter 3/16" (4.8mm) Overall diameter 1/8" Oerall length 1.42" (36mm)...
DREMEL STRAIGHT ROUTER BIT 6.4MM (1/4") 654
Dremel Straight Router Bit 6.4mm (1/4") 654
0.0
In stock
$3200
+ −
For routing, inlaying and mortising in wood and other soft materials. Use freehand or with Dremel Router Attachment 335 or Shaper/Router Table 231.     SPECIFICATIONS Cutting diameter 1/4" (6.4m) Overall diameter 1/8" Oerall length 1.42" (36mm)...
DREMEL STRUCTURED TOOTH TUNGSTEN CARBIDE CUTTER SPEAR TIP 6.4MM 9931 2615009931
Dremel Structured Tooth Tungsten Carbide Cutter Spear Tip 6.4mm 9931 2615009931
0.0
In stock
$5120
+ −
Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. FEATURES Working diameter 6.4mm Shank diameter 3.2mm - Secure objects to a stable surface while working. - For best results,...
DREMEL TILE CUTTING BIT 3.2MM 2615000562
Save 31%
Dremel Tile Cutting Bit 3.2mm 2615000562
0.0
In stock
$1990 $2900 -31%
+ −
Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout. Cuts ceramic wall tile, cement board and plaster (not for use on floor tiles)....
DREMEL TUNGSTEN CARBIDE CUTTER 3.2MM 9903 2615009903
Dremel Tungsten Carbide Cutter 3.2mm 9903 2615009903
0.0
In stock
$3290
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER BALL 3.2MM 9905 2615009905
Dremel Tungsten Carbide Cutter Ball 3.2mm 9905 2615009905
0.0
In stock
$3200
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER BALL NOSE CYLINDER 2.4MM 9904 2615009904
Dremel Tungsten Carbide Cutter Ball Nose Cylinder 2.4mm 9904 2615009904
0.0
In stock
$3200
+ −
Dremel Tungsten Carbide bits outlast high speed cutters many times over. Carbide is the hardest material next to diamonds. Use for shaping,smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard...
DREMEL TUNGSTEN CARBIDE CUTTER CONE 3.2MM 9909 2615009909
Dremel Tungsten Carbide Cutter Cone 3.2mm 9909 2615009909
0.0
In stock
$3200
+ −
Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a...
DREMEL TUNGSTEN CARBIDE CUTTER CYLINDER 2.4MM 9902 2615009902
Dremel Tungsten Carbide Cutter Cylinder 2.4mm 9902 2615009902
0.0
In stock
$3200
+ −
Dremel Tungsten Carbide bits outlast high speed cutters many times over. Carbide is the hardest material next to diamonds. Use for shaping,smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard...
DREMEL TUNGSTEN CARBIDE CUTTER OVAL 3.2MM 9906 2615009906
Dremel Tungsten Carbide Cutter Oval 3.2mm 9906 2615009906
0.0
In stock
$3200
+ −
Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a...
Show another 20 products
Сategories
Product filters
Brand
    Show all (23)
Price
$
–
$
  • $0
  • $8059