Wishlist
0Cart
Menu

Desic

DESIC

Desic supplies the very best range of quality diamond tools for the lapidary and gemstone industries.

We have a range of burrs, blades, grinding cups, drills, hole saws in a range of sizes, etc to suit every application.

Desic diamond, tools you can use.

CALIBRATION SERVICE FOR INFRARED NON-CONTACT THERMOMETER CHAZBG32 FOOD CERTIFIED
Calibration Service For Infrared Non-contact Thermometer CHAZBG32 Food Certified
0.0
In stock
$9900
+ −
This service currently applies to the following product only - Infrared Non-contact Thermometer CHAZBG32 Food Certified If your non-contact infrared thermometer is being used in the food industry then it's recommended it be calibrated annually to ensure it's accuracy. It's a 2...
DESIC ALUMINIUM BASE PLATE FOR FLAT LAP WHEELS 152MM (6")
Desic Aluminium Base Plate For Flat Lap Wheels 152mm (6")
0.0
In stock
$15900
+ −
There is a 7-10 day lead time for this item.     For use with Desic diamond flat lap wheels to provide greater rigidity.     SPECIFICATIONS Diameter 200mm (8") Thickness 10mm Arbor Hole 12.7mm
DESIC ALUMINIUM BASE PLATE FOR FLAT LAP WHEELS 200MM (8")
Desic Aluminium Base Plate For Flat Lap Wheels 200mm (8")
0.0
In stock
$16900
+ −
There is a 7-10 day lead time for this item.     For use with Desic diamond flat lap wheels to provide greater rigidity.     SPECIFICATIONS Diameter 200mm (8") Thickness 10mm...
DESIC ALUMINIUM BASE PLATE FOR FLAT LAP WHEELS 250MM (10")
Desic Aluminium Base Plate For Flat Lap Wheels 250mm (10")
0.0
In stock
$17900
+ −
There is a 7-10 day lead time for this item.     For use with Desic diamond flat lap wheels to provide greater rigidity.     SPECIFICATIONS Diameter 250mm (10") Thickness 10mm Arbor Hole 12.7mm
DESIC BACKER PAD MANDREL FOR POWER DRILL M14
Save 43%
Desic Backer Pad Mandrel for Power Drill M14
0.0
In stock
$850 $1490 -43%
+ −
FEATURES Polishing pads that used to require an angle grinder can now be used with any drill.   The mandrel screws into the backing pad, and the shank becomes your drill bit. SPECIFICATIONS M14 Thread Shank 8mm Recommended operating speed 9,500rpm RECOMMENDED TOOLS Power Drill
DESIC CARBIDE ENGRAVER TIP FOR DREMEL 290 TCET60
Desic Carbide Engraver Tip For Dremel 290 TCET60
0.0
In stock
$1290
+ −
This solid carbide engraver tip with fine 60 degree tip can be used to create fine lines or deep grooves. For use in the Dremel 290 Engraver and other brands that accept a 3.2mm diameter tip. FOR MATERIALS Mild steel, stainless steel, glass, ceramics, plastic, wood and leather etc....
DESIC CARBIDE TIPPED TURNING TOOL SET 8MM 11 PIECE
Save 31%
Desic Carbide Tipped Turning Tool Set 8mm 11 Piece
0.0
In stock
$5900 $8500 -31%
+ −
This set has various internal and external tools for turning, boring, milling, threading and parting.  The C6 carbide tips are suitable for turning steel and steel alloys. It's an ideal set for your mini-lathe and the brazed tips can be re-sharpened with your bench grinder or similar. The...
DESIC COMBINATION DRILL TAP 10MM M10
Desic Combination Drill Tap 10mm M10
0.0
In stock
$2200
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP 3MM M3
Desic Combination Drill Tap 3mm M3
0.0
In stock
$1400
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP 4MM M4
Desic Combination Drill Tap 4mm M4
0.0
In stock
$1500
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP 5MM M5
Desic Combination Drill Tap 5mm M5
0.0
In stock
$1600
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP 6MM M6
Desic Combination Drill Tap 6mm M6
0.0
In stock
$1800
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP 8MM M8
Desic Combination Drill Tap 8mm M8
0.0
In stock
$2100
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COMBINATION DRILL TAP SET 6 PIECE M3-M10
Desic Combination Drill Tap Set 6 Piece M3-M10
0.0
In stock
$4900
+ −
Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping begins. Speeds are the same as the normal speed for the material being tapped, and as with any tapping operation a reverse spin is...
DESIC COUNTERSINK WITH CROSS HOLE SET 4 PIECE
Desic Countersink With Cross Hole Set 4 Piece
0.0
Out of stock
$5900
These cross hole countersinks (also known as zero flute countersinks) are made of High Speed Steel (HSS) for durability when countersinking and deburring metals, wood, plastics and composites. The relieved cam cross hole design allows for faster stock removal and eliminates chatter. They can...
DESIC DIAMOND 2 ROW CONCRETE GRINDING CUP 150MM
Save 47%
Desic Diamond 2 Row Concrete Grinding Cup 150mm
0.0
In stock
$6900 $12900 -47%
+ −
This is a professional quality concrete grinding cup for general purpose use. It can quickly transform rough old concrete into a beautiful polished surface. The open hole arbor will fit all 150mm (6 inch) and larger angle grinders and 2 adaptor rings are included for all...
DESIC DIAMOND BLADE CONTINUOUS TILE 105MM
Save 56%
Desic Diamond Blade Continuous Tile 105mm
0.0
In stock
$1090 $2490 -56%
+ −
FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional finish Dry or wet cutting SIZE Diameter 105mm (4") Blade thickness 1.2mm Segment height 10mm Bore 22.23mm - includes 16mm reducing bush Known as 105...
DESIC DIAMOND BLADE CONTINUOUS TILE 115MM
Save 35%
Desic Diamond Blade Continuous Tile 115mm
0.0
In stock
$1950 $2990 -35%
+ −
FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional finish Dry or wet cutting SIZE Diameter 115mm (4.5") Kerf 1.4mm Bore 22.23 Disc thickness 1.0mm Segment height 10mm...
DESIC DIAMOND BLADE CONTINUOUS TILE 125MM
Save 52%
Desic Diamond Blade Continuous Tile 125mm
0.0
In stock
$1590 $3290 -52%
+ −
FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional finish Dry or wet cutting SIZE Diameter 125mm (5") Kerf 1.4mm Bore 22.23 Disc thickness 1.0mm Segment height 10mm Known as 125x1.4x10x22.23...
DESIC DIAMOND CARVING BURR 20PC SET 6MM SHANK
Save 17%
Desic Diamond Carving Burr 20PC Set 6mm Shank
0.0
In stock
$4900 $5900 -17%
+ −
This is a top quality diamond coated burr set from DESIC. With 20 pieces of various shapes you're bound to have the 'points' you need for your next carving project, whether it's greenstone, bone or glass etc. Can be used in all rotary tools 6.0mm collet. SPECIFICATIONS Head...
Show another 20 products
Price
$
–
$
  • $0
  • $899