Wishlist
0Cart
Menu

Bestsellers

DREMEL ROUTER SHAPER TABLE ATTACHMENT 231 26150231AA
Dremel Router Shaper Table Attachment 231 26150231AA
0.0
In stock
$9900
+ −
Convert your corded rotary tool into a light-duty, bench-mounted precision wood shaper with the Dremel 231 Shaper/Router Table. With a smooth table surface, it performs slotting, edge trimming, grooving and sanding of conventional or irregular shapes. Also features easy to grip plastic knobs...
DREMEL SANDING BAND 12.7MM 120 GRIT 6 PACK 432 2615000432
Dremel Sanding Band 12.7mm 120 Grit 6 Pack 432 2615000432
0.0
In stock
$1590
+ −
These are sanding bands for use with drum sanders. They are really good for grinding, deburring, finishing and polishing flat and contoured surfaces of wood, metal and fiberglass. For use in all rotary tools including Dremel, Ryobi, Fuller, Ozito, GMC and other generic brands that have a...
DREMEL SANDING BAND 12.7MM 240 GRIT 6 PACK 445 2615000445
Save 58%
Dremel Sanding Band 12.7mm 240 Grit 6 Pack 445 2615000445
0.0
In stock
$590 $1390 -58%
+ −
These are sanding bands for use with drum sanders. They are really good for grinding, deburring, finishing and polishing flat and contoured surfaces of wood, metal and fiberglass. For use in all rotary tools including Dremel, Ryobi, Fuller, Ozito, GMC and other generic brands that have a...
DREMEL SANDING BAND 12.7MM 60 GRIT 6 PACK 408 2615000408
Dremel Sanding Band 12.7mm 60 Grit 6 Pack 408 2615000408
0.0
In stock
$1590
+ −
These are sanding bands for use with the Dremel sanding drum. They are good for grinding, deburring, finishing and polishing flat and contoured surfaces of wood, metal and fiberglass etc. For use in all rotary tools including Dremel, Ryobi, Fuller, Ozito, GMC and other generic brands that...
DREMEL SANDING DRUM FOR 12.7MM BANDS 407 2615000407
Dremel Sanding Drum For 12.7mm Bands 407 2615000407
0.0
In stock
$990
+ −
These small drum sanders are great for rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. The sanding band is easily replaced by loosening the screw and sliding it off (if it doesn't slide on easily use talcum powder as a dry...
DREMEL SANDING GRINDING GUIDE ATTACHMENT 576
Save 82%
Dremel Sanding Grinding Guide Attachment 576
0.0
In stock
$290 $1590 -82%
+ −
The Dremel Sanding Grinding Guide improves precision and control on a variety of tasks by providing the  support and stability needed for an accurate job. The Guidepoints work surface features flat and angled  areas to enable sanding and grinding...
DREMEL SHIELD ROTARY ATTACHMENT A550
Dremel Shield Rotary Attachment A550
0.0
In stock
$5900
+ −
The Dremel Shield Attachment redirects debris and sparks during cutting, grinding, sanding and polishing. It provides easy access to the accessory, and does not interfere with the work piece. Can be used with left or right-hand grip positions. Attaches to the tool in place of the...
DREMEL SILICON CARBIDE GRINDING STONE 19.8MM 85422 2615085422
Dremel Silicon Carbide Grinding Stone 19.8mm 85422 2615085422
0.0
In stock
$1690
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL SILICON CARBIDE GRINDING STONE 3.2MM 83702 2615083702
Dremel Silicon Carbide Grinding Stone 3.2mm 83702 2615083702
0.0
In stock
$1590
+ −
Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Always remember to have a spare battery pack charged up so you don't have to quit working to recharge your battery and keep your cordless rotary tool charged up and ready to...
DREMEL SILICON CARBIDE GRINDING STONE 4.8MM 2 PACK 84922 261584922C
Save 70%
Dremel Silicon Carbide Grinding Stone 4.8mm 2 Pack 84922 261584922C
0.0
In stock
$590 $1990 -70%
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL SPANNER COLLET WRENCH 2615040132
Save 83%
Dremel Spanner Collet Wrench 2615040132
0.0
In stock
$190 $1090 -83%
+ −
FEATURES - Combination of wrench and screwdriver. Use for loosening and tightening the collet nut to change bits. - It has a built-in screwdriver that can be used on the 402 mandrel or sanding drum mandrel with screw.  - Hole provides an easy way to hang the wrench...
DREMEL STAINLESS STEEL BRUSH 12.7MM 2 PACK 531-02 26150531AA
Dremel Stainless Steel Brush 12.7mm 2 Pack 531-02 26150531AA
0.0
In stock
$1990
+ −
Stainless steel brushes do not cause after-rust when used on corrosive-resistant materials like pewter, aluminium and stainless steel. FEATURES Working diameter 13mm Shank diameter 3.2mm - Secure objects to a stable surface while working. - For best results, insert the...
DREMEL STAINLESS STEEL BRUSH 3.2MM 2 PACK 532 26150532AA
Save 40%
Dremel Stainless Steel Brush 3.2mm 2 Pack 532 26150532AA
0.0
In stock
$1490 $2490 -40%
+ −
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.   FEATURES Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other...
DREMEL STRAIGHT ROUTER BIT 4.8MM (3/16") 652
Dremel Straight Router Bit 4.8mm (3/16") 652
0.0
In stock
$3200
+ −
For routing, inlaying and mortising in wood and other soft materials. Use freehand or with Dremel Router Attachment 335 or Shaper/Router Table 231.     SPECIFICATIONS Cutting diameter 3/16" (4.8mm) Overall diameter 1/8" Oerall length 1.42" (36mm)...
DREMEL TRIO COLLET ADAPTER FOR 1/8" (3.2MM) SHANK ACCESSORIES
Free shipping
Dremel Trio Collet Adapter For 1/8" (3.2mm) Shank Accessories
0.0
In stock
$2790
+ −
It's back! Thank you for all your inquiries about this item and for being so patient while we made another production run. The Dremel Trio is a great little tool for routing, sanding, and cutting but it's limited by its unusual 3/16" (4.7mm) shank size. There's only a small range of...
DREMEL TUNGSTEN CARBIDE CUTTER BALL 3.2MM 9905 2615009905
Dremel Tungsten Carbide Cutter Ball 3.2mm 9905 2615009905
0.0
In stock
$3200
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER BALL NOSE CYLINDER 2.4MM 9904 2615009904
Dremel Tungsten Carbide Cutter Ball Nose Cylinder 2.4mm 9904 2615009904
0.0
In stock
$3200
+ −
Dremel Tungsten Carbide bits outlast high speed cutters many times over. Carbide is the hardest material next to diamonds. Use for shaping,smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard...
DREMEL WORKSTATION DRILL PRESS AND TOOL HOLDER 220 26150220AA
Dremel Workstation Drill Press And Tool Holder 220 26150220AA
0.0
In stock
$11900
+ −
It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 406mm and 736mm. Compatible with...
EASTWOOD TUBE AND PIPE NOTCHER HOLESAW ADAPTER 1/2" TO 5/8"
Eastwood Tube and Pipe Notcher Holesaw Adapter 1/2" to 5/8"
0.0
In stock
$3800
+ −
Standard bi-metal hole saws have 2 threaded arbor sizes. The Eastwood Pipe Notchers natively accept holesaws with the smaller arbor thread size. This adapter increases the thread size so a higher range of holesaw sizes can be used. Can also be used with any 1/2" holesaw arbor to adapt...
FELO E DETECTOR 90-1000V PLID-EDETECTOR
Felo E Detector 90-1000V PLID-EDETECTOR
0.0
In stock
$7400
+ −
FEATURES > Contactless AC voltage tester with torch  > Torch for illuminating measuring points > Complies with EN 61010-1 > Category CAT III/300V SPECIFICATIONS Voltage range 90 - 1000V
Show another 20 products