Wishlist
0Cart
Menu

Newest

DESIC DIAMOND HAND POLISHING PAD 400 GRIT
Save 39%
Desic Diamond Hand Polishing Pad 400 Grit
0.0
In stock
$1950 $3200 -39%
+ −
These top-quality hand pads from Desic are ideal for gentle polishing and scratch removal on a wide range of materials. Perfect for smoothing edges and use in awkward spaces. Grooves along the sides of the hand pad allow it to be held comfortably. Water is not required,...
DESIC DIAMOND HAND POLISHING PAD 60 GRIT
Save 39%
Desic Diamond Hand Polishing Pad 60 Grit
0.0
In stock
$1950 $3200 -39%
+ −
These top-quality hand pads from Desic are ideal for gentle polishing and scratch removal on a wide range of materials. Perfect for smoothing edges and use in awkward spaces. Grooves along the sides of the hand pad allow it to be held comfortably. Water is not required, although it can be...
DESIC DIAMOND HAND POLISHING PAD 800 GRIT
Save 39%
Desic Diamond Hand Polishing Pad 800 Grit
0.0
In stock
$1950 $3200 -39%
+ −
These top-quality hand pads from Desic are ideal for gentle polishing and scratch removal on a wide range of materials. Perfect for smoothing edges and use in awkward spaces. Grooves along the sides of the hand pad allow it to be held comfortably. Water is not required, although it can...
DESIC DIAMOND HOLESAW DRILLING GUIDE - METAL 2-65MM
Desic Diamond Holesaw Drilling Guide - Metal 2-65mm
0.0
In stock
$4900
+ −
Diamond coated holesaws and core drills often don't have a pilot drill so they will skip around on the surface making it difficult to get the hole in the right place. This drilling guide has a suction cup that sticks to the glass or tile you're drilling, so it's easy to get the hole in the...
DESIC DIAMOND LAPIDARY SAW BLADE 150MM X 0.7MM
Save 50%
Desic Diamond Lapidary Saw Blade 150mm x 0.7mm
0.0
In stock
$1950 $3900 -50%
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 150mm (6") Thickness 0.7mm Bore 25.4mm (1") Recommended 6000 rpm Maximum 10185 rpm Diamond coated...
DESIC DIAMOND LAPIDARY SAW BLADE 200MM X 1.0MM
Save 36%
Desic Diamond Lapidary Saw Blade 200mm x 1.0mm
0.0
In stock
$3500 $5500 -36%
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 200mm (8") Thickness 1.0mm Bore 25mm Recommended 4500 rpm Maximum 7640 rpm Diamond...
DESIC DIAMOND LAPIDARY SAW BLADE 250MM X 0.8MM
Desic Diamond Lapidary Saw Blade 250mm x 0.8mm
0.0
In stock
$6500
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 250mm (10") Thickness 0.8mm Bore 25mm Recommended 3600 rpm Maximum 6115 rpm Diamond coated notched...
DESIC DIAMOND LAPIDARY SAW BLADE 300MM X 1.5MM
Save 50%
Desic Diamond Lapidary Saw Blade 300mm x 1.5mm
0.0
In stock
$5950 $11900 -50%
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 300mm (12") Thickness 1.5mm Bore 25mm Recommended 3000 rpm Maximum 5095 rpm Diamond coated notched...
DESIC DIAMOND LAPIDARY SAW BLADE 350MM X 1.0MM
Desic Diamond Lapidary Saw Blade 350mm x 1.0mm
0.0
In stock
$11900
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 350mm (14") Thickness 1.0mm Bore 32mm Recommended 2500 rpm Maximum 4365 rpm Diamond coated notched...
DESIC DIAMOND LAPIDARY SAW BLADE 400MM X 1.2MM
Desic Diamond Lapidary Saw Blade 400mm x 1.2mm
0.0
In stock
$17900
+ −
These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just making the cut. SPECIFICATIONS Diameter 400mm (16") Thickness 1.2mm Bore 32mm Recommended 2200 rpm Maximum 3800 rpm Diamond coated notched...
DESIC DIAMOND POLISHING COMPOUND 1 X 5G - 13 MICRON CHOICES
Desic Diamond Polishing Compound 1 x 5g - 13 Micron Choices
0.0
In stock
$890
+ −
Diamond polishing or lapping paste. All options are oil based, easy for use and avoid contamination. Suitable for use on jewellery & gemstone, steel & hard metal, aluminium & zinc, all metallurgical purpose. Best used with wool polishers. APPLICATIONS - Polishing close...
DESIC DIAMOND SHARPENING STONE SET 3 PIECES
Save 36%
Desic Diamond Sharpening Stone Set 3 Pieces
0.0
In stock
$2500 $3900 -36%
+ −
When our supplier sent us a sample of these I didn't get too excited because they look like a bit of a boring tool but after trying them on a blunt old chisel I was impressed at how easy it was to get get such a sharp edge. All I had to do was start with the coarse grade, then move to the...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 10MM
Desic Diamond Sintered Holesaw Glass And Tiles 10mm
0.0
In stock
$3500
+ −
The lead time for this product is 7-10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 11MM
Desic Diamond Sintered Holesaw Glass And Tiles 11mm
0.0
In stock
$3700
+ −
The lead time for this product is 7 - 10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 12MM
Desic Diamond Sintered Holesaw Glass And Tiles 12mm
0.0
In stock
$3800
+ −
The lead time for this product is 2 weeks Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very thin...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 13MM
Desic Diamond Sintered Holesaw Glass And Tiles 13mm
0.0
In stock
$3900
+ −
The lead time for this item is 7-10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very thin...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 16MM
Desic Diamond Sintered Holesaw Glass And Tiles 16mm
0.0
In stock
$4300
+ −
The lead time for this item is 7-10 days Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very thin...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 18MM
Desic Diamond Sintered Holesaw Glass And Tiles 18mm
0.0
In stock
$4700
+ −
The lead time for this product is 7-10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 19MM
Desic Diamond Sintered Holesaw Glass And Tiles 19mm
0.0
In stock
$4800
+ −
The lead time for this item is 7-10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very thin...
DESIC DIAMOND SINTERED HOLESAW GLASS AND TILES 22MM
Desic Diamond Sintered Holesaw Glass And Tiles 22mm
0.0
In stock
$4900
+ −
The lead time for this item is 7-10 days. Sintered diamond holesaws last a lot longer (about 50x more) than diamond coated holesaws because the diamonds are embedded throughout the segment and fresh ones are exposed as the bonding metal wears away. These particular ones also have a very...
Show another 20 products