Wishlist
0Cart
Menu

Newest

TUSK VB DIAMOND CORE BIT 45MM VBCB45
Tusk VB Diamond Core Bit 45mm VBCB45
0.0
In stock
$9900
+ −
FOR CUTTING Stone, Concrete, Ceramic, Brick, Porcelain, Terracotta, Plastic and Fibre cement FEATURES Vacuum brazed diamond is fused directly to the blade eliminating the need for bonding agents Designed for angle grinder use to take advantage of the higher...
TUSK VB DIAMOND CORE BIT 5MM VBCB5
Tusk VB Diamond Core Bit 5mm VBCB5
0.0
In stock
$3890
+ −
FOR CUTTING Stone, Concrete, Ceramic, Brick, Porcelain, Terracotta, Plastic and Fibre cement FEATURES Vacuum brazed diamond is fused directly to the blade eliminating the need for bonding agents Designed for angle grinder use to take advantage of the higher...
TUSK VB DIAMOND CORE BIT 8MM VBCB8
Tusk VB Diamond Core Bit 8mm VBCB8
0.0
In stock
$4090
+ −
FOR CUTTING Stone, Concrete, Ceramic, Brick, Porcelain, Terracotta, Plastic and Fibre cement FEATURES Vacuum brazed diamond is fused directly to the blade eliminating the need for bonding agents Designed for angle grinder use to take advantage of the higher...
TUSK VB DIAMOND CORE BIT 6MM VBCB6
Tusk VB Diamond Core Bit 6mm VBCB6
0.0
In stock
$3900
+ −
FOR CUTTING Stone, Concrete, Ceramic, Brick, Porcelain, Terracotta, Plastic and Fibre cement FEATURES Vacuum brazed diamond is fused directly to the blade eliminating the need for bonding agents Designed for angle grinder use to take advantage of the higher...
BENETECH DIGITAL ANEMOMETER WIND SPEED METER GM816
Save 38%
Benetech Digital Anemometer Wind Speed Meter GM816
0.0
In stock
$4900 $7900 -38%
+ −
Benetech Digital Anemometer Wind Speed Meter GM816 'Anemometer' is the technical name for a wind speed meter. It's useful for many applications including sports (handgliding, kite surfing, parasailing etc) and helping decide where to put your wind turbine. There are 5 different wind speed units...
CALIBRATION SERVICE FOR INFRARED NON-CONTACT THERMOMETER CHAZBG32 FOOD CERTIFIED
Calibration Service For Infrared Non-contact Thermometer CHAZBG32 Food Certified
0.0
In stock
$9900
+ −
This service currently applies to the following product only - Infrared Non-contact Thermometer CHAZBG32 Food Certified If your non-contact infrared thermometer is being used in the food industry then it's recommended it be calibrated annually to ensure it's accuracy. It's a 2...
DREMEL 3000 ROTARY TOOL WITH 26 ACC. 3000-1/26 F0133000PM
Dremel 3000 Rotary Tool With 26 Acc. 3000-1/26 F0133000PM
0.0
In stock
$14900
+ −
The Dremel 3000 features the new EZ Twist™ nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor the Dremel 300 but...
DREMEL 290 ENGRAVER CARBIDE TIP 9924 2615009924
Dremel 290 Engraver Carbide Tip 9924 2615009924
0.0
In stock
$1190
+ −
Replacement tip for use with the Dremel Engraver. The solid carbide tip can be used to create fine lines or deep grooves. SPECIFICATIONS Length 18mm Diameter 3.2mm Note Not compatible with Dremel Rotary tools (4000, 3000, 8220, 4200 etc) CONTENTS 1 x Dremel carbide engraving point 9924...
DREMEL 290 ENGRAVER KIT WITH TEMPLATE AND BONUS ENGRAVING TIP F0130290BA
Dremel 290 Engraver Kit With Template and BONUS Engraving Tip F0130290BA
0.0
In stock
$7900
+ −
The Dremel Engraver is now supplied with a bonus tip to keep you going for longer, at no extra charge!  (RRP $12.90) The Dremel Engraver lets you engrave or decorate a wide variety of materials including metal, plastic, glass, ceramic, wood, and leather. The variable stroke control...
DREMEL 3 JAW KEYLESS CHUCK 4486 2615004486
Dremel 3 Jaw Keyless Chuck 4486 2615004486
0.0
In stock
$2900
+ −
This is a GENUINE Dremel product supplied in a retail blister pack*. There are copies out there that may not perfectly match the fine thread on your Dremel tool. This 3-jaw chuck holds drills and accessories from 0.4mm to 3.4mm (shank size) so it makes changing accessories a lot quicker because...
DREMEL 300 SPARE PART NUMBER 3 - ARMATURE 230V 2610941201
Dremel 300 Spare Part Number 3 - Armature 230V 2610941201
0.0
In stock
$8900
+ −
GENUINE DREMEL PART To open your Dremel you will need to remove the screws with a long Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter knife) before the clamshell housing can be split apart. This part is suitable for...
DREMEL 3000 SPARE PART NUMBER 3 - ARMATURE 230V 2610009848 IS
Save 25%
Dremel 3000 Spare Part Number 3 - Armature 230V 2610009848 IS
0.0
In stock
$4900 $6500 -25%
+ −
GENUINE DREMEL PART Fits Dremel 3000 only, not compatible with other models. To open your Dremel 3000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter knife)...
DREMEL 3000 SPARE PART NUMBER 817 - SHAFT LOCK PIN AND SPRING SET 2610009839 IS
Save 4%
Dremel 3000 Spare Part Number 817 - Shaft Lock Pin And Spring Set 2610009839 IS
0.0
In stock
$2490 $2590 -4%
+ −
GENUINE DREMEL PART If you can't lock the shaft on your Dremel 3000 rotary tool then you may have worn out the locking pin. This can happen over time with a lot of use and also if you happen to bump the lock button while the machine is running. To open your Dremel 3000 you will need to...
DREMEL 3000 ROTARY TOOL WITH 30 ACC. 3000-2/30 F0133000PN
Dremel 3000 Rotary Tool With 30 Acc. 3000-2/30 F0133000PN
0.0
In stock
$19900
+ −
The Dremel 3000 features the new EZ Twist nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor...
DREMEL 400 MOTOR BRUSHES 2610907940 IS
Dremel 400 Motor Brushes 2610907940 IS
0.0
In stock
$3200
+ −
The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check them unplug the tool and unscrew (lefty loosey) the brush caps with a small flat head screwdriver. The carbon brushes are held in with springs which should come out...
DREMEL 4000 SPARE PART NUMBER 812 - MOTOR BRUSHES 2610005646 IS
Save 4%
Dremel 4000 Spare Part Number 812 - Motor Brushes 2610005646 IS
0.0
In stock
$2490 $2590 -4%
+ −
GENUINE DREMEL PART Fits Dremel 4000 only, not compatible with other models. Dremel calls these the brush-spring set , number 812 in the parts diagram. The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check them unplug...
DREMEL 4200 AND 4300 MOTOR BRUSHES 2610021241 IS
Save 12%
Dremel 4200 and 4300 Motor Brushes 2610021241 IS
0.0
In stock
$2190 $2490 -12%
+ −
The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check them unplug the tool and unscrew (lefty loosey) the brush caps with a small flat head screwdriver. The carbon brushes are held in with springs which should come out...
DREMEL ACCESSORY KIT 110 PIECE 709 26150709AD IS
Save 38%
Dremel Accessory Kit 110 Piece 709 26150709AD IS
0.0
In stock
$4900 $7900 -38%
+ −
This kit contains a variety of 110 different accessories for cutting, grinding, sanding, cleaning and polishing etc. Suitable for all model Dremel Rotary tools and their knock-offs like Ryobi, Fuller, Ozito, GMC and other generic brands that have a 3.2mm collet (which is 99% of rotary tools)....
DREMEL ACCESSORY KIT 160 PIECE 710 26150710AK
Save 40%
Dremel Accessory Kit 160 Piece 710 26150710AK
0.0
In stock
$6900 $11500 -40%
+ −
This kit contains a variety of 160 different accessories for cutting, grinding, sanding, cleaning and polishing etc. Suitable for all model Dremel Rotary tools and their knock-offs like Ryobi, Fuller, Ozito, GMC and other generic brands that have a 3.2mm collet (which is 99% of rotary tools)....
DREMEL ALUMINIUM OXIDE GRINDING STONE 11.1MM 911 2615000911
Save 47%
Dremel Aluminium Oxide Grinding Stone 11.1mm 911 2615000911
0.0
In stock
$790 $1490 -47%
+ −
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. For best results, insert the accessory bit all the way...
Show another 20 products