Wishlist
0Cart
Menu

Newest

DREMEL SANDING DRUM FOR 12.7MM BANDS 407 2615000407
Dremel Sanding Drum For 12.7mm Bands 407 2615000407
0.0
In stock
$990
+ −
These small drum sanders are great for rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. The sanding band is easily replaced by loosening the screw and sliding it off (if it doesn't slide on easily use talcum powder as a dry...
DREMEL SANDING FLAPWHEEL 9.5MM WIDE 80 GRIT 502
Dremel Sanding Flapwheel 9.5mm Wide 80 Grit 502
0.0
In stock
$2190
+ −
These are really good for rust removal and cleaning surfaces and deburring edges etc. Perfect for sanding flat or contoured surfaces on metal ,wood, rubber or plastic. SPECIFICATIONS Wheel diameter 28.6mm Wheel width 9.5mm Shank diameter 3.2mm Sandpaper grit 80...
DREMEL SILICON CARBIDE GRINDING STONE 19.8MM 85422 2615085422
Dremel Silicon Carbide Grinding Stone 19.8mm 85422 2615085422
0.0
In stock
$1690
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL SILICON CARBIDE GRINDING STONE 3.2MM 83702 2615083702
Dremel Silicon Carbide Grinding Stone 3.2mm 83702 2615083702
0.0
In stock
$1590
+ −
Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Always remember to have a spare battery pack charged up so you don't have to quit working to recharge your battery and keep your cordless rotary tool charged up and ready to...
DREMEL SILICON CARBIDE GRINDING STONE 4.8MM 2 PACK 84922 261584922C
Save 70%
Dremel Silicon Carbide Grinding Stone 4.8mm 2 Pack 84922 261584922C
0.0
In stock
$590 $1990 -70%
+ −
Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. For best results, insert the accessory bit all the way into the tool and then back it out slightly before tigthening down. This provides plenty of shank for the collect or chuck to hold onto the bit....
DREMEL STAINLESS STEEL BRUSH 12.7MM 2 PACK 531-02 26150531AA
Dremel Stainless Steel Brush 12.7mm 2 Pack 531-02 26150531AA
0.0
In stock
$1990
+ −
Stainless steel brushes do not cause after-rust when used on corrosive-resistant materials like pewter, aluminium and stainless steel. FEATURES Working diameter 13mm Shank diameter 3.2mm - Secure objects to a stable surface while working. - For best results, insert the...
DREMEL STAINLESS STEEL BRUSH 19.1MM 2 PACK 530 26150530AC
Dremel Stainless Steel Brush 19.1mm 2 Pack 530 26150530AC
0.0
In stock
$2490
+ −
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals. It is very effective on...
DREMEL STAINLESS STEEL BRUSH 3.2MM 2 PACK 532 26150532AA
Save 40%
Dremel Stainless Steel Brush 3.2mm 2 Pack 532 26150532AA
0.0
In stock
$1490 $2490 -40%
+ −
Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel.   FEATURES Ideal for cleaning, deburring and surface-finishing items made from stainless steel, aluminum, silver, pewter or other...
DREMEL STRUCTURED TOOTH TUNGSTEN CARBIDE CUTTER SPEAR TIP 6.4MM 9931 2615009931
Dremel Structured Tooth Tungsten Carbide Cutter Spear Tip 6.4mm 9931 2615009931
0.0
In stock
$5120
+ −
Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. FEATURES Working diameter 6.4mm Shank diameter 3.2mm - Secure objects to a stable surface while working. - For best...
DREMEL TILE CUTTING BIT 3.2MM 2615000562
Save 31%
Dremel Tile Cutting Bit 3.2mm 2615000562
0.0
In stock
$1990 $2900 -31%
+ −
Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. You can also create decorative wall tile by cutting a design, such as a sailboat, and filling it with colored grout. Cuts ceramic wall tile, cement board and plaster (not for use on floor tiles)....
DREMEL TRIO COLLET ADAPTER FOR 1/8" (3.2MM) SHANK ACCESSORIES
Free shipping
Dremel Trio Collet Adapter For 1/8" (3.2mm) Shank Accessories
0.0
In stock
$2790
+ −
It's back! Thank you for all your inquiries about this item and for being so patient while we made another production run. The Dremel Trio is a great little tool for routing, sanding, and cutting but it's limited by its unusual 3/16" (4.7mm) shank size. There's only a small range of...
DREMEL TUNGSTEN CARBIDE CUTTER BALL 3.2MM 9905 2615009905
Dremel Tungsten Carbide Cutter Ball 3.2mm 9905 2615009905
0.0
In stock
$3200
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER BALL NOSE CYLINDER 2.4MM 9904 2615009904
Dremel Tungsten Carbide Cutter Ball Nose Cylinder 2.4mm 9904 2615009904
0.0
In stock
$3200
+ −
Dremel Tungsten Carbide bits outlast high speed cutters many times over. Carbide is the hardest material next to diamonds. Use for shaping,smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard...
DREMEL TUNGSTEN CARBIDE CUTTER CONE 3.2MM 9909 2615009909
Dremel Tungsten Carbide Cutter Cone 3.2mm 9909 2615009909
0.0
In stock
$3200
+ −
Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a...
DREMEL TUNGSTEN CARBIDE CUTTER CYLINDER 2.4MM 9902 2615009902
Dremel Tungsten Carbide Cutter Cylinder 2.4mm 9902 2615009902
0.0
In stock
$3200
+ −
Dremel Tungsten Carbide bits outlast high speed cutters many times over. Carbide is the hardest material next to diamonds. Use for shaping,smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard...
DREMEL TUNGSTEN CARBIDE CUTTER OVAL 3.2MM 9906 2615009906
Dremel Tungsten Carbide Cutter Oval 3.2mm 9906 2615009906
0.0
In stock
$3200
+ −
Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a...
DREMEL TUNGSTEN CARBIDE CUTTER 3.2MM 9903 2615009903
Dremel Tungsten Carbide Cutter 3.2mm 9903 2615009903
0.0
In stock
$3290
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER SQUARE 3.2MM 9901 2615009901
Dremel Tungsten Carbide Cutter Square 3.2mm 9901 2615009901
0.0
In stock
$3200
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL TUNGSTEN CARBIDE CUTTER TAPER 3.2MM 9910 2615009910
Dremel Tungsten Carbide Cutter Taper 3.2mm 9910 2615009910
0.0
In stock
$3200
+ −
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. FEATURES Working diameter 3.2mm Shank diameter 3.2mm - Secure objects to a stable surface...
DREMEL VERSATIP 2000 GAS SOLDERING IRON 6 IN 1 F0132000JA
Dremel Versatip 2000 Gas Soldering Iron 6 In 1 F0132000JA
0.0
In stock
$13900
+ −
You'll never go back to a corded soldering iron after using one of these! It has LOTS of power, feels good in your hand and can be recharged in only a few seconds. You can take it anywhere and it comes with a variety of tips for different applications. The storage case to keeps it all...
Show another 6 products