Wishlist
0Cart
Menu

On sale

DESIC SDS-PLUS TO 3-JAW CHUCK ADAPTER
Save 41%
Desic SDS-Plus To 3-Jaw Chuck Adapter
0.0
In stock
$2900 $4900 -41%
+ −
This adapter converts SDS-Plus to normal 3-jaw chuck so you can use ordinary twist drills, augers, spade bits and core drills etc in your rotary hammer drill. SPECIFICATIONS Chuck capacity 1.5 - 13mm (1/2") Chuck thread 1/2-20 UNF Supplied with chuck key NOTES 1. SDS-Plus is the...
DESIC SPOT WELD DRILL SET 13 PIECE 9.5MM
Save 58%
Desic Spot Weld Drill Set 13 Piece 9.5mm
0.0
In stock
$2500 $5900 -58%
+ −
The fast, easy way to remove spot welds in car restoration or auto body repair work. The spring loaded pilot pin locates the drill to the centre of the spot weld (no need for a pilot hole) which then cuts a ring around the weld leaving the underlying panel undamaged. The body panel can...
DESIC STEP DRILL SET 3 PIECES SPIRAL FLUTE TIN COATED HEX SHANK 4-32MM
Save 51%
Desic Step Drill Set 3 Pieces Spiral Flute TiN Coated Hex Shank 4-32mm
0.0
In stock
$2900 $5900 -51%
+ −
If there's one drill you should have it's a step drill they are just the best! > Multiple sizes in one drill > Deburs and countersinks > Works on majority of materials > Doesn't need a pilot hole > Drills sheet metal without pulling in > Brilliant at enlarging...
DESIC STEP DRILL SET 5 PIECES STRAIGHT FLUTE COBALT WITH ALUMINIUM CASE 4-35MM
Save 38%
Desic Step Drill Set 5 Pieces Straight Flute Cobalt With Aluminium Case 4-35mm
0.0
In stock
$4900 $7900 -38%
+ −
THIS IS OUR MOST POPULAR SET If there's one drill you should have it's a step drill they are just the best! > Multiple sizes in one drill > Deburs and countersinks > Works on majority of materials > Doesn't need a pilot hole > Drills sheet metal without pulling in >...
DESIC STEP DRILL SPIRAL FLUTE 4-16.5MM
Save 24%
Desic Step Drill Spiral Flute 4-16.5mm
0.0
In stock
$1900 $2500 -24%
+ −
If there's one drill you should in your toolbox it's a step drill, they are just the best! - Multiple sizes in one drill - Deburs and countersinks - Works on majority of materials - Doesn't need a pilot hole - Drills sheet metal without pulling in - Brilliant at enlarging holes - They're...
DESIC STEP DRILL SPIRAL FLUTE COBALT COATED 3-13MM
Save 32%
Desic Step Drill Spiral Flute Cobalt Coated 3-13mm
0.0
Out of stock
$1290 $1890 -32%
If there's one drill you should have in your toolbox it's a step drill, they are just the best! > Multiple sizes in one drill > Deburs and countersinks > Works on the majority of materials > Doesn't need a pilot hole > Drills sheet metal without pulling in > Brilliant at...
DESIC STEP DRILL SPIRAL FLUTE COBALT COATED 4-22MM
Save 50%
Desic Step Drill Spiral Flute Cobalt Coated 4-22mm
0.0
In stock
$1600 $3200 -50%
+ −
If there's one drill you should in your toolbox it's a step drill, they are just the best! - Multiple sizes in one drill - Deburs and countersinks - Works on majority of materials - Doesn't need a pilot hole - Drills sheet metal without pulling in - Brilliant at enlarging holes - They're...
DESIC STEP DRILL SPIRAL FLUTE TIN COATED 6-25MM
Save 50%
Desic Step Drill Spiral Flute TiN Coated 6-25mm
0.0
In stock
$1650 $3300 -50%
+ −
This step drill is ideal for Electricians who need to make holes for 16mm, 20mm, and 25mm conduits. If there's one drill you should in your toolbox it's a step drill, they are just the best! - Multiple sizes in one drill - Deburs and countersinks - Works on majority of materials - Doesn't...
DESIC TCT TILE HOLESAW ADJUSTABLE 20-100MM
Save 70%
Desic TCT Tile Holesaw Adjustable 20-100mm
0.0
In stock
$590 $1990 -70%
+ −
Cut holes in ceramic tiles the easy way. Can also be used to cut fibre cement board. No pilot hole required as it will cut it's own with the centre point. SPECIFICATIONS Adjustable diameter from 20-100mm Centre drill diameter 9.5mm TCT cutting points Maximum 200 rpm Best...
DESIC TORX SCREW FOR TURNING TOOL M4 10MM
Save 50%
Desic Torx Screw for Turning Tool M4 10mm
0.0
In stock
$190 $380 -50%
+ −
Replacement Torx screw for holding turning tips on our indexable turning tool sets.   SPECIFICATIONS Thread M4 Overall length 10mm Thread length 6mm Price is per unit  
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM BALL
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Ball
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM CYLINDER END CUT
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Cylinder End Cut
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM CYLINDER RADIUS
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Cylinder Radius
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM OVAL
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Oval
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM TAPER
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Taper
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM TAPER RADIUS
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Taper Radius
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM TREE POINTED
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Tree Pointed
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 150MM X 6MM X 10MM TREE RADIUS
Save 50%
Desic Tungsten Carbide Burr 150mm x 6mm x 10mm Tree Radius
0.0
In stock
$2250 $4500 -50%
+ −
Long shank burrs are particularly suited to engine porting and other hard to reach places. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster...
DESIC TUNGSTEN CARBIDE BURR 6MM X 10MM ALLOY CUT BALL
Save 47%
Desic Tungsten Carbide Burr 6mm x 10mm Alloy Cut Ball
0.0
In stock
$1850 $3500 -47%
+ −
Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster than traditional hand files allowing for increased productivity. They are...
DESIC TUNGSTEN CARBIDE BURR 6MM X 10MM ALLOY CUT OVAL
Save 47%
Desic Tungsten Carbide Burr 6mm x 10mm Alloy Cut Oval
0.0
In stock
$1850 $3500 -47%
+ −
Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many times faster than traditional hand files allowing for increased productivity. They are...
Show another 20 products