Autosol is a German leading manufacturer of metal polishes and surface care products around the world. Known for "A Brilliant Shine Every Time", it is dedicated to professional quality since 1929.
Autosol products cater to discerning consumers for use on new and classic automobiles, motorcycles, luxury yachts, heavy duty trucks, household items & industrial projects. Autosol products make Do-It-Yourself projects easier for beginners and professionals alike.
Applications: Headlights, Taillights, Parking Lights, Fog Lights, Mirror Lights
FEATURES
- Designed to restore clarity to headlight lenses that have become yellowed, cloudy or hazed over time.
- Improve the performance of the headlight
- Enhance the appearance of the vehicle
- Removes light scratches and soiling leaving a sparkling clean finish
- Headlight lenses have a hard surface layer (Polycarbonate or PMMA plastic), or an Ultraviolet (UV) resistant coating on the outer surface of the lens.
- Gives a brilliant crystal clear shine
SPECIFICATIONS
Headlight Polish 75 ml
Headlight Care 200 ml
WHAT YOU GET
1 x Headlight Polish 75 ml
1 x Headlight Care 200 ml
1 x Microfiber Cloth
Model #0008
Instructions:
1. Clean the lens with soap and water.
2. Protect the trim and painted surfaces around the headlight lens with painter's tape to prevent damage. Two layers of tape are recommended for added protection.
3. If applying by hand, dispense a small amount of AUTOSOL Headlight Polish onto a microfiber cloth. If using a drill and foam pad, apply a small amount of polish to the foam pad before turning on the drill.
4. Start by working the polish around the lens. When using a drill, hold the pad flat on the lens and do not run the foam pad dry. Stop occasionally to make sure the foam pad or microfiber cloth has an adequate supply of polish on it.
5. Polish the lens until the cloudy haze is gone. If additionally clarity is needed, add another small amount of polishing paste and continue buffing. A low steady back and forth action will be the most effective.
6. Next, spray the AUTOSOL Headlight Care (which acts as a sealer) onto the lens and spread evenly with a lint free cloth. Allow two minutes for the sealer to set in and then with a clean cloth buff the lens dry.
7. Remove the tape and wash any residual splatter off with AUTOSOL Car Wash Shampoo.
No reviews found