Menu

Newest

MITUTOYO DIGIMATIC CALIPERS SOLAR POWERED 200MM 8" 0.01MM 0.0005" 500-475
Save 2%
0.0
Out of stock
$81270 $82640 -2%
FEATURES - Mitutoyo's Absolute Solar caliper retains its origin point indefinitely - No battery or origin reset needed - At 60 Lux and above the Absolute solar caliper is ready to start. - An Abasolute scale is incorporated so that zero setting is not required at each power on - Slider...
FEATURES - Mitutoyo's Absolute Solar caliper retains its origin point indefinitely - No battery or origin reset needed - At 60 Lux and above the Absolute solar caliper is ready to start. - An Absolute scale is incorporated so that zero setting is not required at each power on - Slider operation...
MITUTOYO DIGIMATIC DEPTH GAUGE 150MM 6" 0.01MM 0.0005" 571-211-30
Save 6%
FEATURES - Absolute measurement system. No need to reset the origin. - An Absolute scale is incorporated so that zero setting is not required at each power on - Enables stable depth measurement - Slider operation is smooth and comfortable - Optional longer bases are available for models below...
MITUTOYO DIGIMATIC INDICATOR FLAT BACK 25MM 1" 0.01MM 0.0005" ID-U 575-123
Save 2%
FEATURES - ID-U slim and economical design indicator for general use. - The ABS (Absolute) sensor restores the last origin position automatically when the indicator is turned on. - High reliability by eliminating over speed errors. - Large and clear LCD readout with character height of 8mm -...
FEATURES - The ABS (Absolute) sensor restores the last origin position automatically when the indicator is turned on. - High reliability by eliminating over speed errors. - A 5mm-stroke plunger with a higher degree of accuracy - Equipped with data output port that enables incorporation into...
MITUTOYO DIGIMATIC INDICATOR FLAT BACK 2"  ID-CX STANDARD  543-495B
Save 4%
0.0
Out of stock
$1,34030 $1,39900 -4%
FEATURES - ID-CX standard type indicator use a button-type battery and functionality for ease of use. - The ABS (Absolute) sensor restores the last origin position automatically when the indicator is turned on. - High reliability by eliminating over speed errors. - Large LCD display. - Equipped...
MITUTOYO DIGIMATIC INDICATOR FLAT BACK 0.5" ID-CX STANDARD  543-392B
Save 6%
FEATURES - ID-CX standard type indicator use a button-type battery and functionality for ease of use. - The ABS (Absolute) sensor restores the last origin position automatically when the indicator is turned on. - High reliability by eliminating over speed errors. - Large LCD display. - Equipped...
MITUTOYO DIAL TEST INDICATOR POCKET TYPE FULL SET 0.04" 0.001" 513-518T
Save 4%
FEATURES - Jeweled bearings assure higher sensitivity and accuracy - Indicator can be mounted by clamping the stem or the body - Fully adjustable bezel/dial face - Stylus is adjustable within 220° - Bezel is sealed with an O-ring to keep out water and oil - 2 holding bars are supplied for Full...
BOSCH METAL CUT OFF SAW GCO2400J 0601B37240
Save 6%
0.0
In stock
$54400 $58040 -6%
+
The GCO 14-24 J Professional cut-off saw delivers high power in the 355-mm segment and is ready for the toughest applications. Its powerful performance and robust design guarantee a high overload capacity even for demanding jobs. Featuring a patented clamping system, the cut-off saw ensures...
BOSCH 18V LED TORCH LIGHT TOOL ONLY GLI18V-300 06014A1100
Save 13%
FEATURES - Bright with 6 powerful LEDs - Flexible to use: Hold, hang or make it stand - Low energy consumption: 5 hours of continuous light per Ah   SPECIFICATIONS Battery voltage 14.4-18 V(not included) Luminous flux 300 lumen Operating time 14.4V 250 mins/Ah Operating time 18V...
BOSCH 18V BRUSHLESS HAMMER DRILL TOOL ONLY GSB18V-85C 0615990J9S
Save 9%
FEATURES - Kickback control to detect unforeseeable blockage situations and prevent injury - Bluetooth connected ready: Optional Bluetooth chip to allow two way data transfer with mobile device - Electronic Motor Protection: Protects the tools motor from overload and overheating. - Brushless EC...
MITUTOYO BORE GAUGE 50-150MM 0.01MM 511-713-20
Save 6%
0.0
In stock
$90450 $96160 -6%
+
FEATURES > Reduces the influence of heat from the operator's hand by 50% > Grip is large and hollow thereby retaining high-accuracy measurement > Interchangeable anvils for each gauge enable a wide range of diameter measurements. > Longer plunger stroke while maintaining original...
MITUTOYO DATA MANAGEMENT FOOTSWITCH 937179T
Save 6%
0.0
In stock
$21060 $22500 -6%
+
FEATURES - For hands free data input - Easier to use than a hand tool finger switch - Use to trigger Mitutoyo multiplexers - Use in conjunction with USB Input Tool or USB Direct Cables for Data output of Digimatic Tools WHAT YOU GET Mitutoyo Data Management Footswitch 937179T
MITUTOYO DATA MANAGEMENT OUTPUT CABLE FOR COOLANT PROOF CALIPERS 05CZA625
Save 4%
FEATURES - Use in conjunction with Input Tool 264-012-10 - Applicable with Coolant Proof Caliper 500-68X,500-76X, 500-78X and Coolant Proof Digimatic scale units 572-61X - Cable is 2mm/80" in length WHAT YOU GET Mitutoyo Data Management Output Cable For Coolant Proof Calipers 05CZA625
FEATURES - Use in conjunction with USB Direct Cable and USB - ITPAK Software - USB-FSW footswitch adapter for USB Direct data input set up - Must have USB-ITPAK Software installed (search 06AEN846) WHAT YOU GET Mitutoyo Data Management Footswitch Adapter Cable For USB Direct Cable 06ADV384
FEATURES - Standard gauge for depth measurements - Optional longer extension bases are available - Hardened stainless steel vernier slide body - Vernier lock screw - Fine adjustment screw SPECIFICATIONS Range 0-200mm Graduation: 0.05mm Accuracy: ±0.03mm Standard size base plate 100 x 6.5mm...
MITUTOYO DEPTH GAUGE ATTACHMENT FOR CALIPER 100MM 26.5MM 050084-10
Save 11%
FEATURES - Compatible with 100mm, 150mm, 200mm, 4,6 and 8" degree Mitutoyo Vernier and Dial Calipers - Provide accurate depth measurements - Finely grounded base surface and secure locking clamp. - An optional accessory for Calipers - Depth base attachment is 100mm long x 26.5mm high x 12mm...
MITUTOYO DIGIMATIC DEPTH GAUGE 0-200MM 0.01MM 547-211
Save 13%
0.0
In stock
$1,26370 $1,45900 -13%
+
FEATURES - Keep track of the origin point once set for the entire life of the battery. - Optimal tool for measuring holes, narrow grooves and step measurement - Bottom surface of the base is hardened, ground and lapped for highest degree of flatness. - Wide probing range is available with the...
MITUTOYO DEPTH MICROMETER 0-25 63MM 128-101
Save 6%
0.0
In stock
$36380 $38540 -6%
+
FEATURES - General purpose depth measuring micrometer - Measuring rod lock is attached on the rear side of the micrometer - Ratchet stop provides constant measuring force SPECIFICATIONS Range 0-25mm Graduation 0.01mm Base 63 x 16mm Rod diameter 4mm WHAT YOU GET Mitutoyo Depth Micrometer 0-25...
FEATURES - General purpose depth measuring micrometer - Measuring rod lock is attached on the rear side of the micrometer - Ratchet stop provides constant measuring force SPECIFICATIONS Range 0 - 1" Graduation 0.001" Base 2.5" x 0.63' Rod diameter 4mm WHAT YOU GET Mitutoyo Depth Micrometer 0-1...
Show another 20 products